CHOOSE YOUR CURRENCY

DESIGN AND IMPLEMENTATION COMPUTERIZED EMPLOYEE CLOCKING SYSTEM ( A CASE STUDY OF MARLUN CONSTRUCTION COMPANY ENUGU)

Amount: ₦5,000.00 |

Format: Ms Word |

1-5 chapters |



ABSTRACT

This project was borne out of the necessity to address the inherent possible encountered by the employee and staff of MALUM organization. And how to implement a new design to the old existing system. Based on the modern improvement of employee clocking system.

This computerization employee clocking system will make employee boast their productivity and increase the organization record and increase the organization record and the time of employees activities.

 

 

 

 

 

 

 

 

 

 

ORGANIZATION OF WORK

The study is divided into seven chapters. Chapter one deals with the introduction of the study, the statement of the problem, purpose of the study, aim & objectives of this project, the scope, limitations, assumptions and definition of relevant terms.

The review of related literature was discussed in chapter two.

Chapter three deals with the description and analysis of the existing system, fact finding method used, organizational structure, objective of the existing system, input, process and output analysis, information flow diagrams, the problems of the existing system and justification for the new system.

The system design and the output specification, input specification and design, procedure client, system flow file design, procedure chart, system flow chart and system requirement formed the core of chapter four.

Chapter five deals with the implementation of the design system, purpose design, program chart and test run.

The program modules, user guide and documentation exercise was fully expressed in chapter six.

Chapter seven deals with recommendation and conclusion, bibliography.

TABLE OF CONTENTS

Cover page

Title page

Certification

Dedication

Acknowledgement

Abstract

Organization of the work

Table of contents

CHAPTER ONE

1.0     Introduction

  • Background of the study
  • Statement of problem
  • Purpose of study
  • Scope of study
  • Limitations
  • Assumption
  • Definition of terms

CHAPTER TWO

  • Literature review

CHAPTER THREE

  • Description and analysis of the existing system
    • General description of the existing system
    • Method of fact finding used
    • Organizational structure
    • Objectives of the existing system
    • Input, process and output analysis
    • Information slow diagram
    • Problem of the existing system
    • Justification for the new system

CHAPTER FOUR

4.0     Design of the new system

  • Output specification and design
  • Input specification and design
  • File system
  • Procedure chart
  • System flowchart
  • System requirements

CHAPTER FIVE

5.0     Implementation

  • Program design
  • Pseudoes
  • Sources programs
  • Test run

CHAPTER SIX

  • Documentation

6.1     System documentation

  • Program documentation
  • User documentation

CHAPTER SEVEN

  • Conclusion and recommendation

7.1     Conclusion

  • Recommendation

Bibliography

CHAPTER ONE

INTRODUCTION

  • BACKGROUND OF STUDY

Employee clocking systems are time system used by organization to accurately record the number of hours worked by each employee every week

The clock have evolved with time and the companies still need some sort of system that they can use employees payroll and ensure that the employees are paid for each hour they worked.

Today, employee use swipe cards with a negative stripe through a slot that reads their name and records the time every time they clock in or out, much like the old punch clock system of long ago.

At the end of a work week, the main computer computes the total hours worked for every employee and prints it out on a spread sheet. This rids the payroll system of human error, making it much more efficient.

The MALUM organization does not used computerized employee time system. The organization make use of manual time clock system, though time saving and error-free, is not entirely perfect.

Sometimes, the magnetic strip on the back of a card may get damaged. When the employee swipes the card, the machine may not register it.

Such inadequacy are corrected in the computer time clock system. Even with the advert computer software and advanced time keeping techniques, the principle of the employee time clock remains the same.

This project expresses the hourly employees will always need a way to keep track of their time and organizations will need logical ways to monitor and records an employee’s time to ensure productivity.

 

 

 

1.2     STATEMENT OF PROBLEM

The problem is centered on how to design and implement a computerized employee clocking system for MALU organization.

From the study layout the problem determine are:

  1. Inadequacies of the manual time clock system
  2. The problem encountered by the staff reservation section.
  3. The impact of this software reservation section
  4. The impact of this software design is not entirely perfect.
  5. The company policy forbids employees from punching or swiping for each other and both employees stand a chance of losing their jobs if caught.

 

  • PURPOSE OF STUDY

The purpose of the study is:

  1. To determine the capability of computer that I amount of jobs which the computer can properly process at a given period.
  2. To correct the inadequacies of the manual time cock system.
  3. To advent the computer software and advanced time keeping techniques.
  4. To keep track of the time and ensure logical ways to monitor and record an employee’s time.
  5. To choose a system that suits the needs such as biometric time clocks, punch time chalks and computer based time clocks etc.

 

 

 

  • OBJECTIVES OF STUDY

The main aims and objectives of this study is to study is to put to rest the cumbersome and hectic nature of employee time clocking system.

The manual time clock system, though time saving and error-free, but computer to correct the inadequacy and to make the time keeping record to be advanced.

Furthermore, on this study, the company rules and time clocking technology keep changing in order to keep employee instead in check, with the advent of new technology, like clocking in and out using noting but finger prints, such employee behavior is now a thing of the past.

 

1.5     SCOPE OF THE STUDY

This study is limited to only MALUM organization and to the staff and the non-staff.

Though, the scope above is in such away that the study can be carried out in one and only way that is computerizing the employee clocking system. This will help to modernized the inherent problems encountered by the staff of this organization

 

 

1.6     LIMITATION

The factors that militated against this study in the course of gathering facts and figures, went a long way in limiting the intended scope of this study as a result of these setbacks, the work resources was available.

There is the unavailability of library facilities, lack of contribution by men of MALUM organization. These factors contribute immensely to the un-attainment of the desired objectives for the study.

Moreover, lack of manpower in this course of the study. Upon all this was able to was able to successfully complete the resources work and come out with acknowledge work.

 

  • ASSUMPTIONS

The complete implementation and follow up of what is contained in this work will be to a large extent improve and enhance the activities in planning a computerized employee clocking system in MALUM organization.

The workers will be paid according to the time. It is commonly placed near the main entrance or break room. An employee who is not paid for break time must clock out for a break and must also remember to clock in before. Resuming work after the break. Sometimes, it is found that employees try to use time clock to gain an advantage.

 

1.8     DEFINITION OF TERMS

Computer system software: A set of written instruction, which the programs use to computer system.

Visual program: This program will help you to construct and design your program in any kind of form your program required.

Computer: According to French (1992:2) “ a computer is advice like a machine that works under the control of stored programs, automatically accepting and storing, processing data to produce information that is the result of that processing”.

PROGRAM: Set of instructions which are logically related in sequence and which describes actions to be taken by the digital computer in providing a solution on to a given problem.

SOFTWARE: Is the general term used to describe all the various programs that may be used on a computer system together with their associated documentation their with their associated documentation.

HARDWARE: This is the general term used to describe all the electronic and mechanical elements of the computer together with those devices used with the computer.

OPERATION: The action carried out on an activity or process.

MODULES: This is the act of portioning software’s logically into elements that performs specific functions and sub functions.

DATA ENTRY: This is the standard input device through which the system gets more of the instructions and commands


This material content is developed to serve as a GUIDE for students to conduct academic research



DESIGN AND IMPLEMENTATION COMPUTERIZED EMPLOYEE CLOCKING SYSTEM ( A CASE STUDY OF MARLUN CONSTRUCTION COMPANY ENUGU)

NOT THE TOPIC YOU ARE LOOKING FOR?



PROJECTOPICS.com Support Team Are Always (24/7) Online To Help You With Your Project

Chat Us on WhatsApp » 07035244445

DO YOU NEED CLARIFICATION? CALL OUR HELP DESK:

  07035244445 (Country Code: +234)
 
YOU CAN REACH OUR SUPPORT TEAM VIA MAIL: [email protected]


Related Project Topics :

DEPARTMENT CATEGORY

MOST READ TOPICS